100% Pass Top-selling HPE0-J68 Exams - New 2022 HP Pratice Exam
HPE ASE Dumps HPE0-J68 Exam for Full Questions - Exam Study Guide
How to take the HP HPE0-J68 Exam
The HP HPE0-J68 exam is one of the most popular exams in the field of IT. When you have prepared for your HP HPE0-J68 certification, you will be able to make a career in different fields like IT services, software development, and IT consulting. This article is not just a guide, but also a true friend in your journey of passing the HP HPE0-J68 Exam. You can find numerous HP certification guides available on the internet. However, they are not created equal. Some are merely glorified study guides that do not have anything special to offer to their readers. They are even improperly formatted, making them difficult to read through. The worst part of it is that they might contain inaccurate information that might cause more harm than good. When choosing an online guide for passing your HP HPE0-J68 certification exam, you need to be extra careful and cautious about what guide you will use. VCE product testing the demo PDF account. You want to make sure that the information contained in it is reliable and up-to-date. You must also make sure that the format or layout of the guide is easy to read through so that you can easily get access to its content without difficulty. You should take note of such things before deciding which certification guide.
What is the cost of the HP HPE0-J68 Exam
The cost of the HP HPE0-J68 exam is $250 USD.
NEW QUESTION 21
Exhibit:
The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS storage configuration to support oracle database volume to utilize HPE 3PAR compression .
Based on the analysis of the array .what would be your suggestion to implement the requested change?
- A. Balance the workloads between the arrays to have enough headroom for compression
- B. Install the catalyst agent on the oracle server to enable inline compression on the selected VV
- C. Consider adding another node pair for compression to work efficiently
- D. Configure the source-side the compression to offload compression to the Host
Answer: B
NEW QUESTION 22
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Run tunesys after raising the AFC to take advantage of the additional space
- B. Increase current AFC configuration to reflect the additional space
- C. Remove the old AO configuration and recreate a new one
- D. Remove flash cache for all VVS then run create Flash cache
Answer: D
NEW QUESTION 23
A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?
- A. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
- B. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
- C. HPE StoreOnce 5500with data in fight encryption .
- D. HPE XP7 storage with encryption ready disk adapters
Answer: B
NEW QUESTION 24
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?
- A. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- B. A maximum of two switches can be used in an IRF stack when connecting storage.
- C. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
Answer: B
NEW QUESTION 25
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)
- A. NFS
- B. CIFS
- C. ZFS
- D. NTFS
- E. VFS
Answer: A,B
NEW QUESTION 26
Match the data access type in a SAN fabric to the correct description.
Answer:
Explanation:
NEW QUESTION 27
What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?
- A. Deduplication is performed on a per pool and block size basic
- B. Deduplication is performed on a per volume basic
- C. Deduplication is performed on a per array basic
- D. Deduplication is performed on a per application category basic
Answer: A
NEW QUESTION 28
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. StoreEasy - File
- B. Scalability - Object
- C. Nimble - Block
- D. StoreVirtual - Block
- E. MSA - Block
- F. HPE 3PAR StoreServ - Block
Answer: F
NEW QUESTION 29
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?
- A. One Config Advanced
- B. StoreVirtual VSA Ready Nodes
- C. HPE Storage Sizer
- D. NinjaStars
Answer: B
Explanation:
HPE StoreVirtual VSA Ready Nodes-HPE tested reference configurations on HPE ProLiant servers that address typical virtualization and remote office use cases, and deployment of converged solutions.
NEW QUESTION 30
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?
- A. HPE SAN Network Advisor Enterprise
- B. HPE SAN Network Advisor Professional
- C. OneView Global Dashboard
- D. 3PAR Host Explorer
Answer: A
NEW QUESTION 31
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Integration capabilities utilizing HTML
- B. Includes Peer Copy asynchronous replication
- C. Enables automatic transparent failover
- D. Less expensive than traditional backup
- E. Manual data provisioning and policy-based copy protection
Answer: B,D
NEW QUESTION 32
Due to industry regulation a customer is required to store backup at a separate data center from the company's main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?
- A. Nimble AF series in main data center and Nimble SF series in secondary data center
- B. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
- C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
- D. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.
Answer: C
NEW QUESTION 33
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
- A. virtual Copy
- B. Dynamic Optimization
- C. Peer Motion
- D. Network RAID
Answer: C
NEW QUESTION 34
A customer wants to implement a management and monitoring tool for an HPE B-series SAN switch environment. You plan to recommend the HPE SAN Network Advisor.
Which information about the customer's environment will help you to decide which edition to recommend?
- A. Amount of used fabrics
- B. FCIP support
- C. FCoE support
- D. Fabric OS version
Answer: A
Explanation:
- SAN Network Advisor is available in three types of bundles: * No-charge SAN Professional: Up to 300 switch ports, 2 fabrics, B-series Fabric OS only. * For-charge SAN Professional Plus: Up to 2560 switch ports and 36 fabrics. * For-charge SAN Enterprise: Up to 15000 switch ports and 100 fabrics. This bundle is required for B-series DC SAN Backbone Director, SN8000B 8-Slot SAN Director and FICON management.
NEW QUESTION 35
A customer need a backup solution to their virtualized environment .The backup solution must be agentless ,hypervise independent and integrated with HPE storage solutions. The solution must support Nimble snapshot and replication management. What products meets the customer requirement?
- A. Veem Backup and Replication
- B. HPE storeOnce Recovery manager central
- C. Commvault Simpana Intellisnap
- D. Micro Focus Data Protector
Answer: A
NEW QUESTION 36
You are designing an HPE MSA iSCSI for a customer.
Which components are typically part of the solution? (Choose two.)
- A. All-inclusive Multi-system software
- B. Service Processor
- C. Drives
- D. Switch zones
- E. SFPs
Answer: C,E
NEW QUESTION 37
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)
- A. NVMe
- B. FC
- C. SAS
- D. Infiniband
- E. iSCSI
Answer: B,E
NEW QUESTION 38
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?
- A. Dynamic Optimization using tier 1
- B. Dynamic Optimization using tier 2
- C. Adaptive Optimization using tier 1
- D. Dynamic Optimization between tier 0 and tier 1
Answer: D
Explanation:
During a peak period when performance is critical, the VV can be optimized by moving to faster disk and the RAID level.
NEW QUESTION 39
Match the feature to the appropriate C-Series DCNM license type.
Answer:
Explanation:
NEW QUESTION 40
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Loss of full-mesh cluster interconnect
- B. B-series SAN switch upgrades
- C. Loss of persistent cache
- D. Firmware upgrade
- E. Node maintenance or failure
Answer: D,E
NEW QUESTION 41
......
Authentic Best resources for HPE0-J68 Online Practice Exam: https://passguide.dumpexams.com/HPE0-J68-vce-torrent.html