100% Pass Your 1z0-1054-24 Exam Dumps at First Attempt with Dumpexams
Penetration testers simulate 1z0-1054-24 exam PDF
NEW QUESTION # 14
What are thetwo possible reasonsforencumbrance created on the purchase orderto go back to thebudget or funds availability?
- A. When the requisition is set to accrue at period end and partially billed and then canceled or finally closed, encumbrance goes back to the budget to the extent of the unbilled amount.
- B. The purchase order is canceled or finally closed or rejected without performing any receipt or invoice.
- C. When the purchase order is set to accrue at receipt and partially received, then canceled or finally closed, encumbrance goes back to the budget to the extent of the unreceived amount.
- D. The requisition reserved successfully undergoes amendment and is rejected in the reapproval.
Answer: B,C
NEW QUESTION # 15
You want to achievemulti-step cascading allocations. Which feature do you use?
- A. General Ledger journal entries
- B. RuleSets
- C. Point of View (POV)
- D. Formulas
Answer: B
NEW QUESTION # 16
You are using the Create Budgets in a Spreadsheet option to load your budget balances into the General Ledger balances cube. Your FYXX Budget is not appearing in the Budget Name list of values.
What are two reasons for this?
- A. A value for the budget scenario is not created.
- B. Publish Chart of Accounts Dimension Members and Hierarchies to the Balances Cube has not been run.
- C. The Create Scenario Dimension Members program has not been run.
- D. Budgeting is not enabled in the Ledger options.
- E. Transfer Budget Balances to Budget Cubes has not been run.
Answer: A,C
Explanation:
To use the Create Budgets in a Spreadsheet option, you need to have a budget scenario value and a scenario dimension member for your budget. A budget scenario value is a user-defined value that identifies a budget, such as FYXX Budget. A scenario dimension member is a member of the scenario dimension in the General Ledger balances cube that corresponds to a budget scenario value, such as FYXX_Budget. You can create budget scenario values and scenario dimension members using the Manage Budget Scenario Values task or the Create Scenario Dimension Members program. If you do not create these values and members, your budget will not appear in the Budget Name list of values in the spreadsheet. Therefore, the two reasons for your issue are:
* A value for the budget scenario is not created: You need to create a budget scenario value for your budget using the Manage Budget Scenario Values task. This task enables you to define and maintain budget scenario values and their attributes, such as description, start date, end date, and status. You can also specify whether the budget scenario value is enabled for budgeting and reporting. You need to enable the budget scenario value for budgeting to use it in the spreadsheet.
* The Create Scenario Dimension Members program has not been run: You need to run the Create Scenario Dimension Members program to create scenario dimension members for your budget scenario values. This program automatically creates scenario dimension members for all budget scenario values that are enabled for budgeting and do not have existing scenario dimension members. You can run this program manually or schedule it to run periodically. You need to run this program after you create or update budget scenario values to ensure that they are reflected in the scenario dimension.
References:
* Create Budgets in a Spreadsheet
* Manage Budget Scenario Values
* Create Scenario Dimension Members
NEW QUESTION # 17
You are capturing rental costs for a building in a corporate cost center. At month end, you want to allocate those costs to the cost centers in the building based on the floor area occupied. A statistical journal has been entered to record the floor area. You use Calculation Manager to create the allocation.
Where do you reference the statistical balance within the allocation component?
- A. Allocation Range
- B. Target
- C. Offset
- D. Source
- E. Basis
Answer: D
Explanation:
The source is where you specify the amount to be allocated. You can use various sources, such as account balances, fixed amounts, or statistical balances. In this case, you want to use the statistical balance of the floor area as the source of the allocation. The basis is where you specify the driver or factor that determines how the source amount is distributed among the targets. The target is where you specify the destination accounts that receive the allocated amount. The offset is where you specify the account that records the opposite side of the allocation entry. The allocation range is where you specify the scope of the allocation, such as the ledger, balancing segment, or legal entity. References:
* Oracle Financials Cloud Implementing Enterprise Structures and General Ledger, Chapter 3:
Allocations and Periodic Entries, Allocation Components
* Oracle Financials Cloud Using General Ledger, Chapter 3: Allocations and Periodic Entries, Overview
NEW QUESTION # 18
Manage Chart of Accounts Structure and Instance
Scenario
Your client is implementing Oracle Fusion Cloud Financials. The decision is to have a 5-segment Chart of Accounts: Company, Cost Center, Account, Product, and Intercompany. You are working in the General Ledger team and will be responsible for creating the Chart of Accounts Structure and Instance for the Chart of Accounts.
Task 1
Create a Chart of Accounts Structure and Instance for the following Chart of Accounts:
Note:
Prefix all your setups with 07, where 07 is your candidate ID
There is one balancing segment.
Choose the appropriate segment labels.
. For the purpose of this test there is no need to deploy the flexfield.
. Valid code combinations should be added to the Code Combination table automatically.
Shorthand aliases will not be implemented.
. Accept the defaults for the instance segments.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation:
Here are the steps you need to follow:
* Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structures.
* Click on the Create icon to create a new Chart of Accounts Structure. Enter the following information:
* Structure Code: 07COA
* Structure Name: 07 Chart of Accounts
* Description: Chart of Accounts for candidate 07
* Number of Segments: 5
* Click on the Next button to define the segments. Enter the following information for each segment:
* Segment Number: 1
* Segment Name: Company
* Value Set Code: 07Corporate Company
* Value Set Name: 07 Corporate Company
* Maximum Size: 3
* Balancing: Yes
* Segment Label: Company
* Segment Number: 2
* Segment Name: Cost Center
* Value Set Code: 07Corporate Cost Center
* Value Set Name: 07 Corporate Cost Center
* Maximum Size: 4
* Balancing: No
* Segment Label: Cost Center
* Segment Number: 3
* Segment Name: Account
* Value Set Code: 07Corporate Account
* Value Set Name: 07 Corporate Account
* Maximum Size: 8
* Balancing: No
* Segment Label: Natural Account
* Segment Number: 4
* Segment Name: Product
* Value Set Code: 07Corporate Product
* Value Set Name: 07 Corporate Product
* Maximum Size: 3
* Balancing: No
* Segment Label: Product
* Segment Number: 5
* Segment Name: Intercompany
* Value Set Code: 07Corporate Company
* Value Set Name: 07 Corporate Company
* Maximum Size: 3
* Balancing: No
* Segment Label: Intercompany
* Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure.
* Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structure Instances.
* Click on the Create icon to create a new Chart of Accounts Structure Instance. Enter the following information:
* Structure Code: 07COA
* Structure Name: 07 Chart of Accounts
* Description: Chart of Accounts for candidate 07
* Chart of Accounts Structure: 07COA
* Enabled: Yes
* Allow Dynamic Inserts: Yes
* Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure Instance.
You have successfully created a Chart of Accounts Structure and Instance for the given scenario. For more information, you can refer to the following resources:
* Chart of Accounts Structures and Instances
* Chart of Accounts Components
* Minimum Steps For Financial Enterprise Structures Configuration
* Overview of Creating and Configuring Chart of Accounts Structure and Instances
NEW QUESTION # 19
You can run predefined reports to reconcile subledger application balances to General Ledger balances.
Which attribute must you set up on the Manage Values page for chart of accounts segment values so that you can run the Payables to General Ledger Reconciliation report or Receivables to General Ledger Reconciliation report?'
- A. End Date
- B. Start Date
- C. Third Party Control Account
- D. Reconcile
- E. Financial Category
Answer: E
NEW QUESTION # 20
You entered across-validation ruleto prevent thebalance sheet cost center (000)from being used withProfit and Loss Accounts (4000-ZZZZ).
The following combinations exist in theCode Combination table:
* 01-000-4110-00
* 01-000-5299-000
* 01-000-5105-000
* 01-000-7640-00
Which two statements aretrueregardingcross-validation rules?
- A. There is no need to create cross-validation rules ifDynamic Combination Creation Allowedis notenabled for your chart of accounts instance.
- B. The rules will validate and apply tonew and existing accounts.
- C. You need to run theCross-Validation Rule Violations processto allow rules to apply to existing combinations that violate rules.
- D. The rules validate and apply tonew accounts only.
- E. You need to run theCross-Validation Rules processto list and optionally disable combinations that violate rules.
Answer: B,C
NEW QUESTION # 21
You are trying to run a Financial Reporting Web Studio report from Financial Reporting Center. However, it is not appearing as a choice.
Which are two reasons for this? (Choose two.)
- A. You have not saved it in the Shared Folder/Custom/Financials directory.
- B. You have not saved it in the MyFolders directory.
- C. You have not downloaded the report to your local drive.
- D. You have not uploaded it to Financial Reporting Center.
Answer: B,D
Explanation:
According to Oracle documentation, two reasons why a Financial Reporting Web Studio report may not appear as a choice in Financial Reporting Center are: You have not saved it in the Shared Folder/Custom
/Financials directory, and you have not uploaded it to Financial Reporting Center. Financial Reporting Web Studio enables you to design and generate reports with grids, charts, images, and text boxes using data from various sources. Financial Reporting Center enables you to access and run all types of reports from a single user interface. To make a Financial Reporting Web Studio report available in Financial Reporting Center, you must save it in the Shared Folder/Custom/Financials directory and upload it to Financial Reporting Center using Workspace. Therefore, options A and C are correct. Option B is incorrect because saving it in the MyFolders directory does not make it available in Financial Reporting Center. Option D is incorrect because downloading it to your local drive does not make it available in Financial Reporting Center.
NEW QUESTION # 22
When constructing a new chart of accounts instances, it has been decided to control the list of values within certain segments, with the use of related value sets.
When defining new related value sets, which three configuration steps should be considered?
- A. Use table validated type value sets only
- B. Order of the segments does not determine filtering sequence.
- C. Use independent validation type value sets only
- D. Link two value sets together
- E. Link multiple value sets together
- F. Order of the segments determines filtering sequence
Answer: C,D,F
NEW QUESTION # 23
You need to set up a calendar for the year Apr-XX to Mar-YY where YY is the following year, and you would like the periods to be named according to the year they fall in.
What format should you choose?
- A. Period
- B. Year
- C. Calendar Year
- D. Fiscal Year
Answer: D
Explanation:
According to Oracle documentation3, when you need to set up a calendar for the year Apr-XX to Mar-YY where YY is the following year, and you would like the periods to be named according to the year they fall in, you should choose Fiscal Year as the format. A Fiscal Year format enables you to define periods based on fiscal years that span two calendar years. Therefore, option A is correct. Option B is incorrect because a Calendar Year format defines periods based on calendar years that start on January 1st and end on December
31st. Option C is incorrect because a Period format defines periods based on any number of days or weeks.
Option D is incorrect because a Year format defines periods based on calendar years that start on any month other than January and end on any month other than December.
NEW QUESTION # 24
Which two statements are true about infotiles and infolets?
- A. You can refresh infolets to see up-to-date data.
- B. You can create your own user-defined infolets.
- C. Infotiles pull data from a Smart View analysis.
- D. Infolets are accessed only from the News Feed home page layout.
- E. Infotiles have Front view. Back view, and Expanded view.
Answer: A,E
Explanation:
Infotiles and infolets are graphical components that display key information and metrics on the General Accounting dashboard. They help users access many sources of information across the enterprise in an efficient, timely, and engaging manner. Infolets can be refreshed to see up-to-date data by clicking the Refresh icon on the infolet. Infotiles have three views: Front view, which shows a summary of the most important information; Back view, which shows additional details and actions; and Expanded view, which shows a full-screen view of the infotile content. References:
* Oracle Financials Cloud: Using General Ledger, Chapter 6: Financial Reporting and Analysis, Section:
General Accounting Infolets
* Oracle Financials Cloud: Implement General Ledger, Chapter 1: Overview of Oracle Financials Cloud, Section: Overview of Using Infolets to Identify Issues and Prioritize Tasks
NEW QUESTION # 25
You are setting upClose Monitor, which comprises aledger set hierarchy definition.
Which two components of theenterprise structureshould the ledgers in the ledger set share?
- A. Legal Entities, Business Units, and Chart of Accounts
- B. Chart of Accounts, Currency, Accounting Calendar, and Subledger Accounting Method
- C. Chart of Accounts and Business Units
- D. Chart of Accounts
- E. Accounting Calendar
Answer: D,E
NEW QUESTION # 26
Your userforgot the password. How do you resolve this?
- A. Log in to the user's machine as an Administrator and change the password from the login password.
- B. Create a new user ID and password for the user.
- C. Use the Manage Users page to update the user's information and change the password.
- D. Use Access Policy Manager (APM) to reset the user's password.
- E. Use Oracle Identity Management (OIM) to reset the user's password.
Answer: E
NEW QUESTION # 27
Which delivered role can access the full functionality of Functional Setup Manager?
- A. Any functional user
- B. Application Implementation Manager
- C. IT Security Manager
- D. Application Implementation Consultant
- E. Functional Setup Manager Superuser
Answer: B
Explanation:
According to Oracle documentation2, the delivered role that can access the full functionality of Functional Setup Manager is Application Implementation Manager. Functional Setup Manager is a tool that enables you to manage and perform all of the setup tasks required for an application implementation. Application Implementation Manager is a predefined role that grants access to Functional Setup Manager and all of its features, such as setup tasks, implementation projects, setup export and import, and setup reports. Therefore, option A is correct. Option B is incorrect because Functional Setup Manager Superuser is not a delivered role.
Option C is incorrect because IT Security Manager is a role that grants access to security-related tasks, not Functional Setup Manager. Option D is incorrect because any functional user does not have access to Functional Setup Manager by default. Option E is incorrect because Application Implementation Consultant is not a delivered role.
NEW QUESTION # 28
You are reconciling yourPayablesandReceivablesbalances against theGeneral Ledger. You are using the Payables to Ledger Reconciliation report.
You notice discrepancies between the balances in thesubledgers, subledger accounting, and general ledger.
Which three factors are responsible for these out-of-balance situations?
- A. There were manually entered journals against the Payables and Receivables accounts that were posted in General Ledger.
- B. Period Close processes, such as Revaluation, Translation, and Consolidation have not been performed yet.
- C. Intercompany transactions have not been fully processed.
- D. Subledger transactions have been accounted and transferred to General Ledger but have not been posted.
- E. All subledger transactions have been entered but do not have complete accounting.
Answer: B,C,D
NEW QUESTION # 29
Which three factors should you consider while specifying Intercompany System options?
- A. Automatic or manual batch numbering and the minimum transaction amount
- B. Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies
- C. Approvers who will approve intercompany transactions
- D. Whether to allow receivers to reject intercompany transactions
- E. Automatic or manual batch numbering and the maximum transaction amount
Answer: A,B,D
Explanation:
Intercompany System options are used to set up intercompany processing rules at the enterprise level, based on your specific business needs. They help you standardize and simplify transaction processing, minimize disputes, and reduce administrative costs. The three factors that you should consider while specifying Intercompany System options are:
* Automatic or manual batch numbering and the minimum transaction amount: These options help you control the numbering and the size of intercompany transactions. You can choose to use system generated or manual batch numbering, and you can specify a minimum threshold amount for intercompany transactions to prevent immaterial transactions. To use the minimum transaction amount option, you must also select an Intercompany currency option.
* Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies:
This option helps you manage the currency risk and the conversion rate fluctuations for intercompany transactions. You can choose to standardize transaction processing by selecting an Intercompany currency, which means that all intercompany transactions created in the Intercompany module are entered in this currency. Alternatively, you can choose to allow intercompany transactions in local currencies, which means that intercompany transactions can be entered in the ledger currency of the sender or the receiver.
* Whether to allow receivers to reject intercompany transactions: This option helps you handle the approval and dispute resolution process for intercompany transactions. You can choose to allow receivers to reject intercompany transactions if they disagree with the sender's information, such as the amount,the account, or the date. If you enable this option, you must also specify the rejection reason and the notification details for the sender.
References:
* Intercompany System Options
* Implementing Enterprise Structures and General Ledger
* Implement General Ledger
NEW QUESTION # 30
When will Intercompany processing balance a journal using the accounts identified here for the UK Ledger?
- A. when there is a many-to-many journal and you want to use a clearing company
- B. when the journal is not balanced by the primary balancing segment value (BSV)
- C. when the journal is balanced by second balancing segment value
- D. when the journal is balanced by the primary BSV but not by second or third BSV
Answer: D
Explanation:
Intercompany processing will balance a journal using the accounts identified here for the UK Ledger when the journal is balanced by the primary balancing segment value (BSV) but not by second or third BSV. A BSV is a segment in the chart of accounts that identifies a legal entity or business unit for which financial statements are prepared and balanced. A primary BSV is required for every ledger and is used to balance journal entries within a ledger. A secondary or tertiary BSV is optional and is used to balance journal entries across different dimensions other than the primary BSV, such as fund or region. Intercompany processing is a feature that enables intercompany transactions between different legal entities or business units within the same enterprise. Intercompany processing uses intercompany balancing rules to generate intercompany receivables and payables accounts for cross-ledger or cross-BSV journals. Intercompany processing will balance a journal using the accounts identified here for the UK Ledger when the journal is balanced by the primary BSV but not by second or third BSV, as thisindicates that there is an intercompany transaction between different legal entities or business units within the UK Ledger that requires intercompany balancing.
Intercompany processing will not balance a journal using the accounts identified here for the UK Ledger when there is a many-to-many journal and you want to use a clearing company, as this is a scenario that involves multiple legal entities or business units across different ledgers that requires a separate clearing company ledger to perform intercompany balancing. Intercompany processing will not balance a journal using the accounts identified here for the UK Ledger when the journal is not balanced by the primary BSV, as this is an invalid scenario that violates the accounting rules and prevents posting of the journal. Intercompany processing will not balance a journal using the accounts identified here for the UK Ledger when the journal is balanced by second balancing segment value, as this is an incomplete scenario that does not specify whether the journal is also balanced by primary and third BSV. Reference: Oracle Financials Cloud: General Ledger
2022 Implementation Professional Objectives - Configure and Process Intercompany 12
NEW QUESTION # 31
In which two ways can your users personalize the Springboards and Work Areas to suit their individual working styles? (Choose two.)
- A. They can format certain tables by hiding and showing columns, moving columns, and resizing columns
- B. They can use "+" under the Apps section of the News Feed homepage
- C. Users have very little control configuring their Springboards and Work Areas; they can only resize columns
- D. They can have the System Administrator configuring pages for them using Page Composer
Answer: A,B
Explanation:
According to Oracle documentation2, your users can personalize the Springboards and Work Areas to suit their individual working styles in these two ways: They can format certain tables by hiding and showing columns, moving columns, and resizing columns, and they can use "+" under the Apps section of the News Feed homepage. Springboards and Work Areas are user interface components that enable users to access tasks and information relevant to their roles. Users can customize these components by adding or removing tiles, changing layouts, filtering data, and formatting tables. Therefore, options A and D are correct. Option B is incorrect because users have more control over configuring their Springboards and Work Areas than just resizing columns. Option C is incorrect because users do not need to have the System Administrator configuring pages for them using Page Composer.
NEW QUESTION # 32
A new Oracle Fusion Cloud client needs to produce an income statement on a regular basis using Smart View.
Which Smart View tool would be best for this?
- A. Smart Slices
- B. Account Groups
- C. Smart Queries
- D. Query Designer
Answer: D
Explanation:
Query Designer is a Smart View tool that enables you to create and modify ad hoc queries on General Ledger balances cubes. You can use Query Designer to select the dimensions, members, and filters that you want to include in your query, and then retrieve the data in a grid format in Excel. You can also save, open, and refresh your queries as needed. Query Designer is the best tool for producing an income statement on a regular basis using Smart View, because it allows you to easily access and analyze the income and expense accounts, as well as the ledger, period, currency, and other dimensions that are relevant for your report. You can also customize the layout and format of your grid, and use Excel functions and features to enhance your report. References:
* Overview of Smart View
* Creating an Ad Hoc Analysis in Smart View
NEW QUESTION # 33
Your customer has a number of Chart of Account Mapping Rules for their Primary and Secondary ledgers.
You decide to use the FBDI template to load the rules.
Which two statements are true when using this method of entry? (Choose two.)
- A. It supports external integration using REST services.
- B. You can download the template only from the Manage Chart of Accounts Mappings page.
- C. You can create, update, and delete segment rules for a chart of accounts mapping.
- D. You can create, update, and delete account rules for a chart of accounts mapping.
Answer: C,D
Explanation:
According to Oracle documentation3, when using FBDI template to load Chart of Account Mapping Rules for their Primary and Secondary ledgers, you can create, update, and delete account rules for a chart of accounts mapping, and you can create, update, and delete segment rules for a chart of accounts mapping. FBDI enables you to import chart of accounts mapping rules from a spreadsheet template into General Ledger. You can use FBDI to manage both account rules and segment rules for a chart of accounts mapping. Therefore, options C and D are correct. Option A is incorrect because you can download the template from other pages besides the Manage Chart of Accounts Mappings page. Option B is incorrect because FBDI does not support external integration using REST services.
NEW QUESTION # 34
......
Oracle 1z0-1054-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
All 1z0-1054-24 Dumps and Training Courses: https://passguide.dumpexams.com/1z0-1054-24-vce-torrent.html