Searching the best new exam braindumps which can guarantee you 100% pass rate, you don't need to run about busily by, our latest pass guide materials will be here waiting for you. With our new exam braindumps, you will pass exam surely.

2023 Realistic Verified Free CompTIA 220-1001 Exam Questions [Q424-Q441]

Share

2023 Realistic Verified Free CompTIA 220-1001 Exam Questions

220-1001 Real Exam Questions and Answers FREE

NEW QUESTION 424
Which of the following has a P4 connector to provide a 12V output?

  • A. 24-pin adapter
  • B. EIDE port
  • C. eSATA cable
  • D. SCSI cable

Answer: B

 

NEW QUESTION 425
A technician is troubleshooting network connectivity issues after a new wireless router was installed in an office. Users who connect to the new router are unable to access LAN resources.
Which of the following is the MOST likely cause of the issue?

  • A. There are conflicting ARP records
  • B. There are conflicting IP protocols
  • C. There are conflicting gateways on the network
  • D. There are conflicting DHCP servers on the network

Answer: D

 

NEW QUESTION 426
A technician sets up a new printer on the network, allowing it to obtain an IP address. The technician records the IP address and sets up users to print using the information. The following Monday after powering on the printer, users report they can no longer print. After verifying users can access other network shares, the technician prints a configuration page and sees the IP address has changed.
Which of the following is the BEST method for the technician to ensure this will not happen again?

  • A. Set up the users to print using the newly assigned IP address.
  • B. Create an IP reservation for the printer on the DHCP server.
  • C. Set up MAC filtering on the switch to ensure the printer gets the same IP.
  • D. Statically assign the current IP address to the printer.

Answer: B

Explanation:
Explanation
Explanation/Reference:

 

NEW QUESTION 427
Which of the following channels would commonly be used on an 802.11 wireless network?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 428
A technician is setting up a WiFi-enabled thermostat for a customer, but the customer is concerned about
IoT devices getting hacked.
Which of the following BEST address the customer's concerns? (Choose two.)

  • A. Separate the IoT thermostat by segregating it in a DMZ network.
  • B. Disable wireless access on the thermostat to make it unshakable.
  • C. Use the latest encryption standard on the wireless network and set a strong password.
  • D. Upgrade the customer's wireless network encryption to WPA.
  • E. Upgrade the customer's router to the latest version to improve network security.
  • F. Enable two-factor authentication for the IoT device's cloud account, if it is available.

Answer: A,C

 

NEW QUESTION 429
A server needs a RAM upgrade, and a technician has been tasked with retrieving the RAM from storage and then installing it.
Whish of the following is the BEST RAM type for the technician to retrieve?

  • A. DDR4
  • B. SoDIMM
  • C. ECC
  • D. Single channel

Answer: A

Explanation:
Explanation

 

NEW QUESTION 430
A network administrator must install a device that will proactively stop outside attacks from reaching the
LAN.
Which of the following devices would BEST meet the organization's needs?

  • A. IDS.
  • B. Proxy server
  • C. IPS
  • D. Authentication server.

Answer: C

 

NEW QUESTION 431
A technician needs to connect a user to a network share on the server Which of the following ports should the technician allow through the firewall?

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: D

 

NEW QUESTION 432
A technician is setting up a printer for a small office that does not have an RJ-45 jack. The users' computers are all in the same workgroup and are connected physically to the same network switch. The technician needs to make sure all users can print to the new printer through the switch. Which of the following should the technician configure?

  • A. Print server
  • B. Bluetooth printing
  • C. Shared printer
  • D. Cloud printing

Answer: C

 

NEW QUESTION 433
Ann. a user, calls the help desk to request a Windows 10 VM on her workstation to test a third-party application. Ann is concerned about system instability, since the application is resource intensive and requires a minimum of 8GB of RAM, two processor cores, and 250GB of HDD space. Ann's machine currently has
32GB of RAM. an eight-core processor, and a 2TB HDD. Which of the following BEST describes a system configuration that will ensure both VM and host system stability?

  • A. Configure the VM with one processor core, 6GB of RAM, and 250GB of HDD space.
  • B. Configure the VM with two processor cores, 8GB of RAM, and 250GB of HDD space.
  • C. Configure the VM with three processor cores, 12GB of RAM. and 350GB of HDD space.
  • D. Configure the VM with four processor cores. 16GB of RAM. and 500GB of HDD space.

Answer: D

 

NEW QUESTION 434
The graphics department has an issue with printing certain files. The printer does not print the complete image on larger files. A technician verifies the network speed of the printer is set to 1GB and that regular text files print without issue. Which of the following is the MOST likely cause of this problem?

  • A. The printer needs more RAM
  • B. The printer network connection is set to half duplex
  • C. The print server is timing out
  • D. The users are not printing in post-script mode

Answer: A

 

NEW QUESTION 435
Which of the following network types is used to provide network connectivity between remote branch offices?

  • A. PAN
  • B. WLAN
  • C. LAN
  • D. WMN
  • E. WAN

Answer: A

 

NEW QUESTION 436
SIMULATION
Ann, a local librarian, has had a previously used wireless access point donated to her. She has instructed you to configure this new wireless access point for her public library. Ann plans to allow anyone to connect to the access point without having to ask her for configuration information. Additionally, Ann knows that her neighbors have wireless network and wants to ensure that her network has the least likelihood of interfering with the other networks. Ann has provided you with the following information.
Wireless Name: Library
New Router Password: Secure$1
INSTRUCTIONS
Instructions: Select the Public Library in the diagram to configure the wireless network. Once the wireless network tabs are configured, select the save button. When you have completed the simulation, please, select the Done button to submit.



Answer:

Explanation:


 

NEW QUESTION 437
A user reports the following issues with a smartphone:
* Wrong Hems selected
* Multiple selections with a single touch
* Incorrect letters write typing
* Does not hold a charge
Which of the following would MOST likely resolve these issues?

  • A. Replacing the screen
  • B. Checking the charge level
  • C. Replacing the charging device
  • D. Removing the screen protector
  • E. Checking for a swollen battery

Answer: A

 

NEW QUESTION 438
Which of the following network servers would be MOST useful in translating a URL into an IP address?

  • A. DHCP server
  • B. Print server
  • C. DNS server
  • D. Mail server
  • E. Web server

Answer: C

 

NEW QUESTION 439
A customer asks a technician to determine the specifications for new office workstations. Which of the following should the technician consider FIRST?

  • A. The form factor
  • B. The software requirements
  • C. The type of network
  • D. The number of PCs

Answer: B

 

NEW QUESTION 440
A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor. The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC.
Which of the following should the technician do FIRST?

  • A. Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.
  • B. Run continuity tests using an Ethernet cable tester to determine if any pairs are broken.
  • C. Check the RJ45 end connectors, the jacks, and the ends of the run of the Cat 5 UTP cable for loose connections, pinched bends, and visible damage.
  • D. Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.

Answer: B

 

NEW QUESTION 441
......

Exam Dumps 220-1001 Practice Free Latest CompTIA Practice Tests: https://passguide.dumpexams.com/220-1001-vce-torrent.html