Get Prepared for Your NSK300 Exam With Actual 70 Questions
Valid NSK300 Test Answers Full-length Practice Certification Exams
NEW QUESTION # 17
You deployed Netskope Cloud Security Posture Management (CSPM) using pre-defined benchmark rules to monitor your cloud posture in AWS, Azure, and GCP. You are asked to assess if you can extend the Netskope CSPM solution by creating custom rules for each environment.
Which statement is correct?
- A. With Netskope CSPM, you can create custom rules using Domain Specific Language for AWS. Azure, and GCP
- B. With Netskope CSPM, you can create custom rules using Domain Specific Language for AWS. Azure, but not for GCP.
- C. Custom rules using Domain Specific Language are only available when using SSPM.
- D. You will need to evaluate SaaS Security Posture Management (SSPM) in addition to CSPM so that rules applied to GCP will align with Google Workspace
Answer: A
Explanation:
Netskope Cloud Security Posture Management (CSPM) allows for the creation of custom rules using Domain Specific Language (DSL) for all three major cloud platforms: AWS, Azure, and GCP. This capability is integral to CSPM and enables organizations to tailor their security posture assessments to their specific needs across different cloud environments.
The ability to create custom rules using DSL within Netskope CSPM for AWS, Azure, and GCP is documented in the Netskope Knowledge Portal. It provides detailed instructions on how to build custom rules under Policies > Security Posture > Profiles & Rules for security assessment of resources across these cloud platforms
NEW QUESTION # 18
You are troubleshooting an issue with users who are unable to reach a financial SaaS application when their traffic passes through Netskope. You determine that this is because of IP restrictions in place with the SaaS vendor. You are unable to add Netskope's IP ranges at this time, but need to allow the traffic.
How would you allow this traffic?
- A. Use NPAto implement Source IP anchonng so the traffic will egress from the corporate data center.
- B. Use Explicit Proxy Over Tunnel (EPoT) so the traffic will egress from the corporate data center.
- C. Use an IPsec tunnel to forward traffic so it will egress from the corporate data center
- D. Use Cloud Explicit Proxy so the traffic will egress from the corporate data center
Answer: D
Explanation:
To allow traffic to a financial SaaS application that is being blocked due to IP restrictions, the best option is to useCloud Explicit Proxy. This method allows traffic to egress from the corporate data center without requiring Netskope's IP ranges to be added to the SaaS vendor's allowlist.By configuring an allowlist in the Cloud Explicit Proxy settings, you can add any source egress IP addresses for your on-premises users, and Netskope will allow the traffic from the added user and IP address without authenticating1.
The process for configuring an allowlist in Cloud Explicit Proxy to manage unauthenticated traffic from specific IP addresses is detailed in the Netskope Knowledge Portal1. This solution is suitable for scenarios where adding Netskope's IP ranges to the SaaS vendor's IP restrictions is not feasible.
NEW QUESTION # 19
You have an NG-SWG customer that currently steers all Web traffic to Netskope using the Netskope Client.
They have identified one new native application on Windows devices that is a certificate-pinned application.
Users are not able to access the application due to certificate pinning. The customer wants to configure the Netskope Client so that the traffic from the application is steered to Netskope and the application works as expected.
Which two methods would satisfy the requirements? (Choose two.)
- A. Configure the SSL Do Not Decrypt policy to not decrypt traffic for domains used by the native application.
- B. Configure domain exceptions in the steering configuration for the domains used by the native application.
- C. Tunnel traffic to Netskope and bypass traffic inspection at the Netskope proxy.
- D. Bypass traffic using the bypass action in the Real-time Protection policy.
Answer: A,C
NEW QUESTION # 20
Review the exhibit.
You work for a medical insurance provider. You have Netskope Next Gen Secure Web Gateway deployed to all managed user devices with limited block policies. Your manager asks that you begin blocking Cloud Storage applications that are not HIPAA compliant Prior to implementing this policy, you want to verity that no business or departmental applications would be blocked by this policy.
Referring to the exhibit, which query would you use in the Edit Widget window to narrow down the results?
- A. SELECT application WHERE 'HIPAA' NOT IN app-cci-compliance AND WHERE 'Cloud Storage' IN category
- B. Cloud Confidence Compliance neq HIPAA and Cloud Confidence Category is Cloud Storage
- C. app-compliance does not contain HIPAA and category must equal Cloud Storage
- D. app-ccl-compliance-cert neq 'HIPAA' and category eq 'Cloud Storage'
Answer: D
Explanation:
The correct query to use in the Edit Widget window to narrow down the results is option A: "app-ccl-compliance-cert neq 'HIPAA' and category eq 'Cloud Storage'". This query filters out applications that are not HIPAA compliant and belong to the Cloud Storage category, ensuring that only non-HIPAA compliant cloud storage applications are displayed in the results. This helps in identifying and blocking such applications as per the manager's request without affecting business or departmental applications. It aligns with Netskope's capabilities to enforce controls and restrictions on high-risk cloud services to help address HIPAA and HITECH compliance, as well as to audit suspected violations with a full cloud and web activity trail1.
NEW QUESTION # 21
You are already using Netskope CSPM to monitor your AWS accounts for compliance. Now you need to allow access from your company-managed devices running the Netskope Client to only Amazon S3 buckets owned by your organization. You must ensure that any current buckets and those created in the future will be allowed Which configuration satisfies these requirements?
- A. Steering: Cloud Apps Only. All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Match -ALLAccounts Action: Allow
- B. Steering: All Web Traffic Policy type: API Data Protection Constraint: Storage, Bucket Does Match *@myorganization.com Action: Allow
- C. Steering: Cloud Apps Only, All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Not Match -ALLAccounts Action: Block
- D. Steering: Cloud Apps Only Policy type: Real-time Protection
Constraint: Storage. Bucket Does Not Match *@myorganization.com Action: Block
Answer: C
NEW QUESTION # 22
Review the exhibit.
You created an SSL decryption policy to bypass the inspection of financial and accounting Web categories. However, you still see banking websites being inspected.
Referring to the exhibit, what are two possible causes of this behavior? (Choose two.)
- A. The policy is in a "pending changes" state.
- B. The policy is in a "disabled" state.
- C. An incorrect category has been selected
- D. An incorrect action has been specified.
Answer: C,D
Explanation:
The issue described in the exhibit is that banking websites are still being inspected despite creating an SSL decryption policy to bypass the inspection of financial and accounting web categories.
Possible Causes:
An incorrect category has been selected (Option B):
If the SSL decryption policy is configured to bypass the wrong category (e.g., not the actual financial and accounting category), it won't effectively exclude banking websites from inspection.
An incorrect action has been specified (Option D):
If the action specified in the policy is not set to "Bypass," it won't achieve the desired behavior. The policy should explicitly bypass SSL inspection for the selected category.
Solution:
Verify that the correct category (financial and accounting) is selected in the policy, and ensure that the action is set to "Bypass."
NEW QUESTION # 23
Review the exhibit.
You are attempting to block uploads of password-protected files. You have created the file profile shown in the exhibit.
Where should you add this profile to use in a Real-time Protection policy?
- A. Add the profile to a Malware Detection profile that is used in a Real-time Protection policy.
- B. Add the profile directly to a Real-time Protection policy as a Constraint.
- C. Add the profile to a DLP profile that is used in a Real-time Protection policy.
- D. Add the profile to a Constraint profile that is used in a Real-time Protection policy.
Answer: C
Explanation:
In Netskope Cloud Security, to block uploads of password-protected files, you should add the file profile to a DLP (Data Loss Prevention) profile that is used in a Real-time Protection policy. The DLP profiles in Netskope are designed to detect and protect sensitive data in real-time and at rest across the cloud environment. This approach ensures that any file matching the criteria set in the file profile, such as being password-protected, will trigger the DLP rules and prevent the upload action in real-time.
The information aligns with the best practices for setting up DLP profiles in Netskope as described in their documentation and resources
NEW QUESTION # 24
Review the exhibit.
You created an SSL decryption policy to bypass the inspection of financial and accounting Web categories.
However, you still see banking websites being inspected.
Referring to the exhibit, what are two possible causes of this behavior? (Choose two.)
- A. The policy is in a "pending changes" state.
- B. The policy is in a "disabled" state.
- C. An incorrect category has been selected
- D. An incorrect action has been specified.
Answer: C,D
NEW QUESTION # 25
You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?
- A. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
- B. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN configuration for all Netskope traffic.
- C. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
- D. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.
Answer: C
Explanation:
To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3.
In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection. Reference:
The answer is based on general knowledge of VPN configurations and their impact on traffic routing.
NEW QUESTION # 26
A hospital has a patient form that they share with their patients over Gmail. The blank form can be freely shared among anyone. However, if the form has any information filled out. the document is considered confidential.
Which rule type should be used in the DLP profile to match such a document?
- A. Use predefined DLP Rule(s) that match the patient name.
- B. Use a dictionary rule for all your patient names.
- C. Use Exact Match with patient names
- D. Use fingerprint classification.
Answer: D
Explanation:
The appropriate rule type to use in the DLP profile for a document that is considered confidential when filled out isfingerprint classification. Fingerprinting is a method used to identify and protect sensitive data within documents. It works by creating a digital fingerprint of a file, which can then be used to detect any copies or derivatives of that file.In this case, fingerprinting would allow the hospital to differentiate between the blank patient form, which can be freely shared, and the same form with patient information filled out, which is confidential1.
Netskope's DLP rules can contain elements such as predefined data identifiers, custom data identifiers, keyword identifiers from a dictionary file, RegEx expressions, and exact match criteria1.For this specific use case, fingerprint classification is the most effective method as it can accurately detect the presence of filled- out information in the forms, which is crucial for maintaining patient confidentiality as per HIPAA regulations1.
NEW QUESTION # 27
Your client is an NG-SWG customer. They are going to use the Explicit Proxy over Tunnel (EPoT) steering method. They have a specific list of domains that they do not want to steer to the Netskope Cloud.
What would accomplish this task''
- A. Use an SSL decryption policy.
- B. Define exceptions in the Netskope steering configuration
- C. Define exception domains in the PAC file.
- D. Create a real-time policy with a bypass action.
Answer: C
Explanation:
To accomplish the task of not steering specific domains to the Netskope Cloud while using the Explicit Proxy over Tunnel (EPoT) steering method, you would define exception domains in the PAC file (A). This is because the PAC file is used to specify which domains should bypass the proxy and connect directly, thus allowing for granular control over the traffic that is steered to Netskope1.
NEW QUESTION # 28
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Configure a Real-time Protection policy with the action set to Allow.
- B. Set the No SNI setting in Netskope to Bypass.
- C. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- D. Ensure that the users add the self-signed certificate to their local certificate store.
Answer: C
Explanation:
To allow traffic from a website with a self-signed certificate that is being blocked by Netskope with an SSL error, the correct action is to configure a Do Not Decrypt SSL Decryption rule. This rule will allow the traffic to pass without being decrypted, thus bypassing the SSL error caused by the self-signed certificate. This is a common practice for handling traffic from trusted internal applications or specific external sites that use self-signed certificates1.
NEW QUESTION # 29
You are building an architecture plan to roll out Netskope for on-premises devices. You determine that tunnels are the best way to achieve this task due to a lack of support for explicit proxy in some instances and IPsec is the right type of tunnel to achieve the desired security and steering.
What are three valid elements that you must consider when using IPsec tunnels in this scenario? (Choose three.)
- A. cipher support on tunnel-initiating devices
- B. bandwidth considerations
- C. the impact of threat scanning performance
- D. the categories to be blocked
- E. Netskope Client behavior when on-premises
Answer: A,B,C
NEW QUESTION # 30
Users at your company's branch office in San Francisco report that their clients are connecting, but websites and SaaS applications are slow When troubleshooting, you notice that the users are connected to a Netskope data plane in New York where your company's headquarters is located.
What is a valid reason for this behavior?
- A. The Netskope Client's default DNS over HTTPS call is failing.
- B. The Netskope Client's on-premises detection check failed.
- C. The closest Netskope data plane to San Francisco is unavailable.
- D. The Netskope Client's DNS call to Secure Forwarder is failing
Answer: C
Explanation:
The reported issue of slow website and SaaS application access for users in the San Francisco branch office, despite being connected to a Netskope data plane in New York, can be attributed to the geographical distance between the user location and the data plane. The Netskope Security Cloud operates through a distributed network of data planes strategically placed in various regions. When users connect to a data plane that is geographically distant, it can result in latency due to longer network traversal times. In this case, the closest Netskope data plane to San Francisco might be unavailable or experiencing high load, leading to performance issues. To address this, consider optimizing data plane selection based on proximity to the user location or investigating any data plane availability or performance issues.
Reference:
Netskope Cloud Security
Netskope Resources
Netskope Documentation
NEW QUESTION # 31
Review the exhibit.
You are asked to integrate Netskope with Crowdstrike EDR. You added the Remediation profile shown in the exhibit.
Which action will this remediation profile take?
- A. The malware will be quarantined.
- B. The endpoint will be isolated.
- C. The malware hash will be added as an IOC in Crowdstrike.
- D. The malware hash will be added as an IOC in Netskope.
Answer: C
Explanation:
In the exhibit, the Malware Remediation Profile is configured with:
* Connected EDR Server: crowdstrike-demo
* Selected Action: Add to watchlist/blocklist
* Not Selected: Isolate, Alert
When using CrowdStrike as an EDR integration, the action "Add to watchlist/blocklist" corresponds to:
## Adding the malware hash as an Indicator of Compromise (IOC) inside CrowdStrike Falcon.
CrowdStrike will then block or flag that hash across all managed endpoints, depending on its local policies.
NEW QUESTION # 32
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Configure a Real-time Protection policy with the action set to Allow.
- B. Set the No SNI setting in Netskope to Bypass.
- C. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- D. Ensure that the users add the self-signed certificate to their local certificate store.
Answer: C
Explanation:
To allow traffic from a website with a self-signed certificate that is being blocked by Netskope with an SSL error, the correct action is to configure aDo Not Decrypt SSL Decryption rule. This rule will allow the traffic to pass without being decrypted, thus bypassing the SSL error caused by the self-signed certificate.This is a common practice for handling traffic from trusted internal applications or specific external sites that use self- signed certificates1.
The Netskope Community Forum discusses the application of exceptions for sites with self-signed certificates and the use of SSL decryption policies to bypass the blocking1.Additionally, the Netskope Knowledge Portal provides information on managing error settings and configuring SSL decryption rules2.
NEW QUESTION # 33
Review the exhibit.
You are asked to integrate Netskope with Crowdstrike EDR. You added the Remediation profile shown in the exhibit.
Which action will this remediation profile take?
- A. The malware will be quarantined.
- B. The malware hash will be added as an IOC in Crowdstrike.
- C. The endpoint will be isolated.
- D. The malware hash will be added as an IOC in Netskope.
Answer: C
Explanation:
The remediation profile shown in the exhibit will take the action of isolating the endpoint. This is indicated by the "Isolate" option being checked under "TAKE ACTIONS" in the configuration settings. When this option is selected, the remediation profile is configured to isolate the endpoint upon detection of a threat, which is a common response to contain a potential security breach and prevent further spread of malware within the network1.
NEW QUESTION # 34
You need to extract events and alerts from the Netskope Security Cloud platform and push it to a SIEM solution. What are two supported methods to accomplish this task? (Choose two.)
- A. Use Cloud Ticket Orchestrator.
- B. Stream directly to syslog.
- C. Use Cloud Log Shipper.
- D. Use the REST API.
Answer: C,D
Explanation:
To extract events and alerts from the Netskope Security Cloud platform and integrate them with a SIEM (Security Information and Event Management) solution, you can utilize the following supported methods:
Cloud Log Shipper (CLS):
The Cloud Log Shipper is designed to forward Netskope logs to external systems, including SIEMs.
It allows you to export logs in real-time or batch mode to a destination of your choice.
By configuring CLS, you can ensure that Netskope events and alerts are sent to your SIEM for further analysis and correlation.
Reference:
REST API:
The Netskope Security Cloud provides a comprehensive REST API that allows you to programmatically retrieve data, including events and alerts.
You can use the REST API to query specific logs, incidents, or other relevant information from Netskope.
By integrating with the REST API, you can extract data and push it to your SIEM solution.
Netskope Cloud Security
Netskope Resources
Netskope Documentation
These methods ensure seamless data flow between Netskope and your SIEM, enabling effective security monitoring and incident response.
NEW QUESTION # 35
......
Netskope NSK300 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Accurate & Verified 2025 New NSK300 Answers As Experienced in the Actual Test!: https://passguide.dumpexams.com/NSK300-vce-torrent.html