Latest Success Metrics For Actual NSE7_OTS-7.2 Exam (Updated 74 Questions)
Genuine NSE7_OTS-7.2 Exam Dumps Free Demo Valid QA's
Fortinet NSE7_OTS-7.2 exam is a challenging test that requires a significant amount of preparation and study. However, the rewards of passing NSE7_OTS-7.2 exam are significant. Not only will successful candidates have the skills they need to protect their organizations from cyber threats, but they will also have a respected certification that demonstrates their expertise in the field of OT security.
NEW QUESTION # 14
Refer to the exhibit. Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- B. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- C. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- D. IT and OT networks are separated by segmentation.
Answer: A,D
NEW QUESTION # 15
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other. Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)
- A. FGT-2 controls intra-VLAN traffic through firewall policies.
- B. Traffic must be inspected by FGT-EDGE in OT networks.
- C. Micro-segmentation on FGT-2 prevents direct device-to-device communication.
- D. The switch on FGT-2 must be hardware to implement micro-segmentation.
Answer: A,C
NEW QUESTION # 16
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiEDR for endpoint detection
- B. FortiSIEM for security incident and event management
- C. FortiGate for SD-WAN
- D. FortiNAC for network access control
- E. FortiGate for application control and IPS
Answer: A,D,E
NEW QUESTION # 17
A supervisor is configuring a software switch on a FortiGate device. What must the supervisor configure on FortiGate to control the traffic between member interfaces on the software switch, using firewall policies?
- A. The supervisor must configure the software switch with at least one wireless interface and one VLAN interface.
- B. The supervisor must add different VLAN interfaces to the software switch.
- C. The supervisor must configure a separate forward domain for the software switch.
- D. The supervisor must configure intra-switch-policy to explicit.
Answer: D
NEW QUESTION # 18
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication. What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- B. Enable two-factor authentication with FSSO.
- C. Under config user settings configure set auth-on-demand implicit.
- D. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
Answer: D
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 19
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Role-based authentication on FortiNAC
- B. Local authentication on FortiGate
- C. Two-factor authentication on FortiAuthenticator
- D. FSSO authentication on FortiGate
Answer: B,C
NEW QUESTION # 20
Refer to the exhibit.
You are assigned to implement a remote authentication server in the OT network.
Which part of the hierarchy should the authentication server be part of?
- A. Core
- B. Access
- C. Edge
- D. Cloud
Answer: C
NEW QUESTION # 21
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
Answer: C
Explanation:
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 22
The OT network analyst runs different level of reports to quickly explore threats that exploit the network. Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?
- A. OT/loT reports
- B. Compliance reports
- C. Threat hunting reports
- D. CMDB reports
Answer: C
NEW QUESTION # 23
Refer to the exhibit. In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall. Which statement about the topology is true?
- A. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- B. There is no micro-segmentation in this topology.
- C. PLCs use IEEE802.1Q protocol to communicate each other.
- D. An administrator can create firewall policies in the switch to secure between PLCs.
Answer: B
NEW QUESTION # 24
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiNAC
- B. FortiSwitch
- C. FortiEDR
- D. FortiGate
Answer: D
Explanation:
Explanation
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 25
How can you achieve remote access and internel availability in an OT network?
- A. Create a back-end backup network as a redundancy measure.
- B. Implement SD-WAN to manage traffic on each ISP link.
- C. Create more access policies to prevent unauthorized access.
- D. Add additional internal firewalls to access OT devices.
Answer: B
NEW QUESTION # 26
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to forward only domain controller traffic.
- B. FortiGate is configured with forward-domains to reduce unnecessary traffic.
- C. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
- D. FortiGate is configured with forward-domains to forward only company domain website traffic.
Answer: B
NEW QUESTION # 27
Refer to the exhibit. An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Change the security action of the industrial category to monitor.
- B. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
- C. Set the priority of the C.BO.NA.1 signature override to 1.
- D. Set all application categories to apply default actions.
Answer: C
Explanation:
The application sensor settings allow you to configure the security action for each application category and network protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection. Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack. The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10. In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category. The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol. The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol. The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol. The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol. The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network. To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
NEW QUESTION # 28
Refer to the exhibit.
In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set FortiGate to operate in transparent mode.
- B. Set a software switch on FortiGate to handle inter-VLAN traffic.
- C. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
- D. Set a unique forward domain on each interface on the network.
Answer: C
NEW QUESTION # 29
In the context of FortiNAC, what is a key feature of a logical network?
- A. It groups up to 10 VLANs into a single policy.
- B. It creates a one-to-one association between a network access policy and a VLAN.
- C. It simplifies network access policy management by reducing the number of policies needed.
- D. It can identify several endpoints with a single rule.
Answer: C
NEW QUESTION # 30
Refer to the exhibit.
Which statement is true about application control inspection?
- A. Security actions cannot be applied on the lowest level of the hierarchy.
- B. The parent signature takes precedence over the child application signature.
- C. The industrial application control inspection process is unique among application categories.
- D. You can control security actions only on the parent-level application signature
Answer: D
NEW QUESTION # 31
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. A supervisor must purchase an industrial signature database and import it to the FortiGate.
- B. By default, the industrial database is enabled.
- C. An administrator must create their own database using custom signatures.
- D. A supervisor can enable it through the FortiGate CLI.
Answer: D
NEW QUESTION # 32
......
Fortinet NSE7_OTS-7.2 Certification Exam is a comprehensive exam that tests the knowledge and skills of security professionals in the field of OT security. By earning this certification, candidates can demonstrate their expertise in Fortinet NSE 7 OT Security 7.2 and their ability to design and implement secure solutions for industrial control systems and other OT environments. Fortinet NSE 7 - OT Security 7.2 certification is recognized globally and can help professionals advance their careers in the field of cybersecurity.
NSE7_OTS-7.2 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://passguide.dumpexams.com/NSE7_OTS-7.2-vce-torrent.html