100% Guaranteed Results PAM-SEN Unlimited 138 Questions [2024]
PAM-SEN Dumps PDF - Want To Pass PAM-SEN Fast
NEW QUESTION # 24
You are installing a CPM.
In addition to Add Safes, Add/Update Users, Reset Users' Passwords and Manage Server File Categories, which Vault authorization(s) does a CyberArk user need to install the CPM?
- A. Manage Directory Mapping
- B. Activate Users
- C. Audit Users, Add Network Areas
- D. Backup All Safes, Restore All Safes
Answer: B
NEW QUESTION # 25
A customer has two data centers and requires a single PVWA url.
Which deployment provides the fastest time to reach the PVWA and the most redundancy?
- A. Deploy two PVWAs using DNS round robin.
- B. Deploy two PVWAs behind a global traffic manager.
- C. Deploy one PVWA only.
- D. Deploy two PVWAs in an active/standby mode.
Answer: B
NEW QUESTION # 26
You want to improve performance on the CPM by restricting accounts for the CYBRWINDAD platform to only the WINDEMEA and WINDEMEA_Admin safes.
How do you set this in CyberArk?
- A. In the settings for Configuration/CPM assigned to the WINDEMEA and WINDEMEAADMIN safes, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEAADMIN).
- B. Modify cpm.ini on the relevant CPM/s and add the setting AllowedSafesCYBRWINDAD and set to (WINDEMEA)|(WINDEMEAADMIN).
- C. In the CYBRWINDAD platform, under Automatic Password Management/General, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEA_ADMIN). Most Voted
- D. In the CYBRWINDAD platform, under UI&Workflows/Properties/Optional, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEA_ADMIN).
Answer: C
NEW QUESTION # 27
The primary purpose of the CPM is Password Management.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 28
Which SMTP address can be set on the Notification Settings page to re-invoke the ENE setup wizard after the initial Vault installation?
- A. 192.168.1.1
- B. 255.255.255.255
- C. 1.1.1.1
- D. 8.8.8.8
Answer: C
NEW QUESTION # 29
The Remote Desktop Services role must be properly licensed by Microsoft.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 30
Which parameter must be provided when registering a primary Vault in Azure, but not in Amazon Web Services?
- A. /RDPGateway
- B. /MasterPass
- C. /RecPub
- D. /AdminPass
Answer: A
NEW QUESTION # 31
A customer asked you to help scope the company's PSM deployment.
What should be included in the scoping conversation?
- A. Recordings codec
- B. Recordings file type
- C. Recordings file path
- D. Recordings retention period
Answer: D
NEW QUESTION # 32
HTML5 Gateway can be installed on which supported UNIX OS versions? (Choose two.)
- A. Ubuntu 20.x
- B. Red Hat Enterprise Linux 7.x
- C. Android 11.x
- D. AK 7.x
- E. CentOS 7.x
Answer: B,E
NEW QUESTION # 33
In which configuration file on the Vault can filters be configured to either include or exclude log messages that are sent through SNMP?
- A. PARAgent.ini
- B. CyberArkv2 MIB file
- C. TSParm.ini
- D. DBParm.ini
Answer: A
NEW QUESTION # 34
What would be a good use case for the Disaster Recovery module?
- A. PSM is used.
- B. Off site replication is required.
- C. Integration with an Enterprise Backup Solution is required.
- D. Recovery Time Objectives or Recovery Point Objectives are at or near zero.
Answer: B
NEW QUESTION # 35
Which method can be used to directly authenticate users to PSM for SSH? (Choose three.)
- A. OpenID Connect (OIDC) authentication
- B. CyberArk authentication Most Voted
- C. RADIUS authentication Most Voted
- D. LDAP authentication Most Voted
- E. Windows authentication
- F. SAML authentication
Answer: B,C,D
NEW QUESTION # 36
The vault server uses a modified version of the Microsoft Windows firewall.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION # 37
Which keys are required to be present in order to start the PrivateArk Server Service? Select all that apply.
- A. Recovery Private Key
- B. Safe Key
- C. Server Key
- D. Recovery Public Key
Answer: C
NEW QUESTION # 38
Which is the correct order of installation for PAS components?
- A. Vault, CPM. PSM, PVWA
- B. Vault, CPM. PVWA, PSM
- C. CPM, Vault. PSM, PVWA
- D. PVWA, Vault, CPM, PSM
Answer: B
NEW QUESTION # 39
In order to avoid conflicts with the hardening process, third party applications like Antivirus and Backup Agents should be installed on the Vault server before installing the Vault.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION # 40
At what point is a transparent user provisioned in the vault?
- A. When a directory mapping matching that user id is created.
- B. When a vault admin runs LDAP configuration wizard.
- C. The first time the user logs in.
- D. During the vault's nightly LD|^P refresh
Answer: A
NEW QUESTION # 41
A first PSM server has been installed.
What should you confirm before installing any additional PSM servers?
- A. The PSM ID of the first installed PSM server was changed and the additional PSM server can use the same PSM ID.
- B. The path of the Recordings Folder must be different on all PSM installations.
- C. The user performing the installation is a direct owner in the PSMUnmanagedSessionAccounts Safe, PSM safe and member of PVWAMonitor group.
- D. The user performing the installation is not a direct owner in the PSMUnmanagedSessionAccounts Safe.
Most Voted
Answer: D
NEW QUESTION # 42
As a member of a PAM Level-2 support team, you are troubleshooting an issue related to load balancing four PVWA servers at two data centers. You received a note from your Level-1 support team stating "When testing PVWA website from a workstation, we noticed that the "Source IP of last sign-in" was shown as the VIP (Virtual IP address) assigned to the four PVWA servers instead of the workstation IP where the PVWA site was launched from." Which step should you take?
- A. Add the VIP (Virtual IP address) assigned to the four PVWA servers to the certificates issued for all four PVWA servers, if missing.
- B. Edit the dbparm.ini file on the Vault server and add the IP or subnet of the workstation to the whitelist.
- C. Verify the "LoadBalancerClientAddressHeader" parameter setting in PVWA configuration file Web.config is set to "X-Forwarded-For".
- D. Add a firewall rule to allow the testing workstation to connect to the VIP (Virtual IP address) assigned to the four PVWA servers on Port TCP 443.
Answer: C
NEW QUESTION # 43
What is a step to enable NTP synchronization on a stand-alone Vault?
- A. Restart the organization's NTP servers.
- B. Edit dbparm.ini and add a Firewall rule for the NTP address.
- C. Run Powershell and add the NTP module.
- D. Restart the Vault Event Notification Engine service.
Answer: B
NEW QUESTION # 44
......
The CyberArk PAM-SEN exam covers a range of topics related to PAM, including the principles of least privilege, password management, session isolation, and audit and compliance. Candidates will be tested on their ability to configure and manage CyberArk's PAM solution, including its various components such as the Vault, Central Policy Manager, and Privileged Session Manager. PAM-SEN exam also covers best practices for implementing PAM in an enterprise environment, such as managing access controls, monitoring privileged activity, and integrating PAM with other security tools.
Updated Verified PAM-SEN Q&As - Pass Guarantee: https://passguide.dumpexams.com/PAM-SEN-vce-torrent.html