The Ultimate Cisco 500-710 Dumps PDF Review
Achieve The Utmost Performance In 500-710 Exam Pass Guaranteed
Cisco 500-710 certification exam is an important credential for IT professionals who want to advance their careers in video infrastructure implementation. Cisco Video Infrastructure Implementation certification demonstrates a candidate's ability to design, deploy, and support video infrastructure solutions that meet the needs of their organizations. It also provides a competitive edge in the job market by demonstrating a candidate's advanced skills and knowledge in this specialized area of IT.
Cisco 500-710 certification exam is an important credential for IT professionals who want to demonstrate their knowledge and expertise in implementing video infrastructure solutions. Cisco Video Infrastructure Implementation certification exam covers a broad range of topics, including video endpoints, gatekeepers, multipoint control units, conferencing solutions, and collaboration applications. By passing the Cisco 500-710 exam, candidates can prove their ability to design, deploy, and support video infrastructure solutions that meet the needs of their organizations.
NEW QUESTION # 23
Which two protocols are used in the H.323 standard? (Choose two.)
- A. H.245
- B. 802.1
- C. SDP
- D. SIP
- E. Q.931
Answer: A,E
Explanation:
The H.323 standard defines the protocols to provide audio-visual communication sessions on any packet network1 The H.323 standard uses a number of protocols to establish and control multimedia sessions, such as voice and video calls. Two of the protocols used in the H.323 standard are H.245 and Q.931.
H.245 is a protocol that is used for media control and logical channel signaling2 H.245 allows the endpoints to negotiate the media capabilities, such as the codec, the bit rate, and the format, and to open and close the logical channels for media transmission. H.245 also provides functions for conference control, such as floor control, chair control, and multipoint mode. H.245 messages are exchanged between the endpoints using TCP or UDP.
Q.931 is a protocol that is used for call signaling and connection control3 Q.931 is based on the ISDN protocol and is adapted for packet networks. Q.931 allows the endpoints to set up, maintain, and terminate the calls, and to exchange information such as the call identity, the call type, the call state, and the reason for call release. Q.931 messages are exchanged between the endpoints using TCP.
The other options are not protocols used in the H.323 standard. SDP is a protocol that is used to describe the media session parameters, such as the media type, the codec, the port number, and the encryption method.
SDP is used in conjunction with SIP, but not with H.323. SIP is another protocol that is used to establish and control multimedia sessions on packet networks, but it is not part of the H.323 standard. SIP is an alternative to H.323 and has a different architecture, syntax, and functionality. 802.1 is a standard that defines the LAN protocols, such as the MAC address, the VLAN, the spanning tree, and the link aggregation. 802.1 is not related to the H.323 standard, which operates at the application layer. References: H.323 - Wikipedia, H.245 - Wikipedia, Q.931 - Wikipedia
NEW QUESTION # 24
When you write a new app in Tropo, in which format must the app scripts be saved?
- A. Js
- B. .mp4
- C. .json
- D. .wav
- E. .xml
Answer: A
NEW QUESTION # 25
Integrated Development Environment helps you to develop, test, and build an application. Which option is an IDE tool that can be used with Cisco Spark?
- A. Windows: Notepad++
- B. GitHub
- C. OSX: Atom
- D. Linux: Brackets
- E. Pythonanywhere
Answer: B
NEW QUESTION # 26
An engineer notices that users are inadvertently changing several random settings on endpoints in remote offices. Using TMS, where doesthe engineer navigate to resolve this issue?
- A. Monitoring > Conference Control Center
- B. Booking > Conference Templates
- C. System > Provisioning
- D. System > Configuration Backup
Answer: D
NEW QUESTION # 27
Which group of items must be configured when adding a Cisco Meeting Server toTMS before the server can be used in scheduled conferences?
- A. domain, numeric ID base, numeric ID quantity
- B. DNS address, numeric ID base, numeric ID quantity
- C. domain, numeric ID base, conference ID range
- D. MACaddress, numeric ID base, numeric ID quantity
Answer: A
NEW QUESTION # 28
For Business to Business calls, which option must be configured on an Expressway Edge to route calls to an unknown domain?
- A. DNS zone and a public DNS address
- B. neighbor zone to the other business
- C. SIP trunk to a public DNS server
- D. traversal zone to a public DNS address
Answer: A
Explanation:
= For Business to Business (B2B) calls, the Expressway Edge must be able to route calls to domains that are not registered or known in advance. This can be achieved by configuring a DNS zone on the Expressway Edge, which allows it to perform DNS lookups for the destination domain and find the appropriate SIP server to route the call. A public DNS address must be specified for the DNS zone, which can be either a static IP address or a hostname that resolves to a public DNS server. The DNS zone must also be linked to a search rule that matches the destination domain pattern and assigns a priority and weight for the zone123 References :
= 1Cisco Expressway Basic Configuration Deployment Guide (X14.3) - Configuring DNS Zones 2Cisco Expressway IP Port Usage Configuration Guide (X14.3) - DNS Zone 3Cisco Expressway Administrator Guide (X14.3) - Search Rules
NEW QUESTION # 29
For Hybrid Services to be fully enabled with Cisco Spark, how many connectors must be established in the Cisco premises environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
* Hybrid Services are a set of features that allow you to connect your on-premises or partner-hosted Cisco collaboration components to the cloud-based Cisco Spark capabilities1.
* Connectors are software modules that run on Expressway-C or Expressway-E and provide secure communication between your premises environment and the cloud1.
* To enable Hybrid Services with Cisco Spark, you need to establish four connectors in your premises environment123:
* Calendar Connector: This connector integrates your on-premises Microsoft Exchange or Office
365 calendar with Cisco Spark, enabling users to schedule and join meetings from their calendar applications or devices1.
* Call Service Connector: This connector enables Cisco Spark to use your on-premises call control (Cisco Unified Communications Manager or Cisco Business Edition) for PSTN calling, extension dialing, and desk phone control1.
* Directory Connector: This connector synchronizes your on-premises Active Directory or LDAP directory with Cisco Spark, allowing users to search and communicate with their colleagues using their corporate email addresses1.
* Serviceability Connector: This connector collects diagnostic data and logs from your on-premises devices and components and uploads them to the cloud for troubleshooting and analysis1.
* The other options are incorrect because:
* A. 2 is too few for Hybrid Services to be fully enabled with Cisco Spark. You need at least three connectors (Calendar, Call Service, and Directory) to enable the core features of Hybrid Services1. The Serviceability Connector is optional but recommended for support and maintenance1.
* C. 3 is also too few for Hybrid Services to be fully enabled with Cisco Spark. You need all four connectors (Calendar, Call Service, Directory, and Serviceability) to enable the full functionality and benefits of Hybrid Services1.
* D. 1 is not enough for Hybrid Services to be fully enabled with Cisco Spark. You need four different connectors (Calendar, Call Service, Directory, and Serviceability) to enable different aspects of Hybrid Services1.
References := 1: The best of both worlds - Cisco Spark Hybrid Services 2: Deployment guide for Hybrid Calendar - Deploy Expressway ... - Cisco 3: Deployment guide for Hybrid Message - Deploy Cisco Webex Hybrid Message ... : Deployment guide for Serviceability Connector - Deploy ... - Cisco : Deployment guide for Hybrid Calling for Webex Devices (Device ... - Cisco
NEW QUESTION # 30
As engineer notices that TMS Conference Control Center is not displaying the interface on a scheduler's computer, but it operates properly on the administrator's computer. Which cause is the most likely?
- A. The server domain of the scheduler's computer must be properly configured.
- B. NET or IS is not set upon the scheduler's computer.
- C. The network has a port blockage.
- D. Java must be properly updated and configured on the scheduler's computer.
Answer: D
Explanation:
* The Cisco TelePresence Management Suite (TMS) is a software application that provides scheduling, management, and monitoring of video conferencing resources1.
* The TMS Conference Control Center (CCC) is a web-based interface that allows administrators and schedulers to view and control the active and completed conferences on the TMS2.
* The CCC requires Java to be installed and enabled on the web browser of the user who accesses it3. Java is a programming language and platform that allows web applications to run on different devices and browsers4.
* If the CCC is not displaying the interface on a scheduler's computer, but it operates properly on the administrator's computer, the most likely cause is that Java must be properly updated and configured on the scheduler's computer. This means that the scheduler's computer either does not have Java installed, has an outdated or incompatible version of Java, or has Java disabled or blocked by the browser settings or security software35.
* To fix this issue, the scheduler should follow these steps35:
* Check if Java is installed on the computer by visiting [this website].
* If Java is not installed, download and install the latest version of Java from [this website].
* If Java is installed, check if it is up to date by visiting [this website].
* If Java is not up to date, download and install the latest version of Java from [this website].
* Check if Java is enabled and allowed on the web browser by following the instructions for the specific browser from [this website].
* Check if Java is blocked by any firewall, antivirus, or security software on the computer and adjust the settings to allow Java to run.
* Restart the web browser and try to access the CCC again.
* The other options are incorrect because:
* NET or IS are not related to the CCC or Java. NET is a framework for developing and running applications on Windows. IS is a common abbreviation for information systems, which are the combination of hardware, software, data, and people that support organizational goals.
* The server domain of the scheduler's computer is not relevant to the CCC or Java. The server domain is the name of the network that the computer belongs to, such as example.com. Theserver domain does not affect the display of the CCC, as long as the computer can access the TMS web server through the network.
* The network has a port blockage is unlikely to be the cause of the CCC not displaying the interface, because the CCC uses the same port as the TMS web server, which is port 80 by default. If the network had a port blockage, the scheduler would not be able to access the TMS web server at all, not just the CCC.
References := 1: Cisco TelePresence Management Suite - Overview 2: Cisco TelePresence Management Suite Administrator Guide (14.4) 3: Cisco TelePresence Management Suite Administrator Guide (14.4) 4: What is Java and why do I need it? 5: Why are Java applications blocked by your security settings with the latest Java? : [Do I have Java?] : [Download Java] : [Verify Java Version] : [How do I enable Java in my web browser?] : What is .NET? : What is Information Systems? : What is a Domain Name Server (DNS) and How Does it Work? : Cisco TelePresence Management Suite Installation and Upgrade Guide (14.4)
NEW QUESTION # 31
Which two products are available as multipoint conferencing options in the CMR Premise platform? (Choose two.)
- A. Telepresence Server
- B. Cisco Telepresence Multipoint Switch
- C. Cisco Meeting Server
- D. Cisco Expressway
- E. Cisco VCS
Answer: A,B
NEW QUESTION # 32
Which Cisco Spark hybrid call service integrates Cisco Spark with an existing Cisco call- control platform, which makes it possible for users to make and receive calls on their Cisco device or Spark application using the same dialing procedure as with on-premises registered endpoints?
- A. Hybrid Call Connect
- B. Call Service Aware
- C. Hybrid Call Service
- D. Call Service Connect
Answer: D
NEW QUESTION # 33
An engineer must match any incoming call to the Expressway that is searching for an E.164 address of only 6 digits and append the domaincisco.comto the end. Which pattern match and replace string using regular expressions accomplish this task? (Choose two.)
- A. replace string: \[email protected]
- B. pattern match: ({6}*)
- C. replace string: \[email protected]
- D. pattern match({6}\d)
- E. pattern match({5}\d)
- F. replace string: \[email protected]
Answer: D,F
Explanation:
= To match any incoming call to the Expressway that is searching for an E.164 address of only 6 digits and append the domain cisco.com to the end, you need to use a pattern match and a replace string using regular expressions. Regular expressions are a way of describing patterns of text using special characters and symbols1. The Expressway supports the use of regular expressions in several features, such as search rules, transforms, and dial plan2.
A pattern match is a regular expression that defines the criteria for matching the incoming call. A replace string is a regular expression that defines how to modify the matched call and add the desired domain. The Expressway uses the following syntax for pattern match and replace string2:
* The pattern match is enclosed in parentheses, such as (pattern).
* The replace string is preceded by a colon, such as :replace.
* The replace string can use backreferences to refer to the matched groups in the pattern match, such as
\1, \2, etc.
For example, the pattern match and replace string (pattern):replace means that the Expressway will match the incoming call with the pattern and replace it with the replace string.
In this question, the pattern match should match an E.164 address of only 6 digits. An E.164 address is a global phone number that can have up to 15 digits, starting with a plus sign (+)3. To match only 6 digits, we can use the following regular expression:
* ({6}\d) : This means that the Expressway will match any 6 consecutive digits (\d) and capture them as a group ({6}). The curly braces indicate the number of repetitions of the preceding character. The parentheses indicate the grouping of the characters.
The replace string should append the domain cisco.com to the end of the matched E.164 address. To do this, we can use the following regular expression:
* :\[email protected] : This means that the Expressway will replace the matched E.164 address with the first captured group (\1) followed by an at sign (@) and the domain cisco.com.
Therefore, the correct pattern match and replace string using regular expressions are:
* pattern match: ({6}\d)
* replace string: \[email protected]
The other options are incorrect because:
* A. pattern match: ({6}) : This means that the Expressway will match any 6 consecutive characters () and capture them as a group. The asterisk means that the preceding character can be repeated zero or more times. This is too broad and can match non-digit characters as well.
* C. pattern match: ({5}\d) : This means that the Expressway will match any 5 consecutive digits (\d) and capture them as a group. This is too short and will not match an E.164 address of 6 digits.
* D. replace string: \[email protected] : This means that the Expressway will replace the matched E.164 address with the sixth captured group (\6) followed by an at sign (@) and the domain cisco.com. This is incorrect because there is only one captured group in the pattern match, so \6 will not refer to anything.
* F. replace string: [email protected] : This means that the Expressway will replace the matched E.164 address with a dollar sign ($) followed by an at sign (@) and the domain cisco.com. This is incorrect because the dollar sign is a special character in regular expressions that means the end of the string. To use it literally, it needs to be escaped with a backslash ().
References := Regular Expressions, Cisco Expressway Basic Configuration Deployment Guide, E.164 : The international public telecommunication numbering plan
NEW QUESTION # 34
Which two statements about endpoint registration authentication are true? (Choose two.)
- A. When a subzone is set for "Treat as Authenticated", the endpoint must have the correct authentications configured.
- B. The endpoint and Expressway must be configured and synchronized with an NTP server delivering an identical time stamp.
- C. Authentication credentials can be stored in the local database of the Expressway.
- D. SIP endpoints always need authentication credentials.
- E. Expressways and endpoints do not need to be synchronized with identical NTP timestamps.
Answer: B,C
NEW QUESTION # 35
Which three hybrid connectors allow Cisco Spark to be integrated with an on-premises solution? (Choose three.)
- A. Directory Service
- B. Directory Connect
- C. Call Connector
- D. Calendar Aware
- E. Calendar Connector
- F. Calendar Service
Answer: B,C,E
Explanation:
Cisco Spark is a cloud-based collaboration platform that allows users to create, share, and communicate with each other through messaging, calling, and meeting features. Cisco Spark can be integrated with an on- premises solution using hybrid connectors, which are software applications that securely connect Cisco Spark to the organization's premises or to the Cisco Hosted Collaboration Solution (HCS) in a partner cloud. The hybrid connectors enable integration with Cisco Spark for various services, such as calendar, call, directory, media, and serviceability. 12345, three hybrid connectors that allow Cisco Spark to be integrated with an on- premises solution are:
* Calendar Connector: This connector allows users to schedule and join Webex meetings from their Microsoft Exchange or Google Calendar. It also enables features such as One Button to Push (OBTP) and Personal Meeting Room (PMR) for Cisco video devices. The Calendar Connector runs as an application within Cisco Expressway or Enterprise Compute Platform (ECP).
* Call Connector: This connector allows users to make and receive calls from their Cisco Spark app using their existing phone system, such as Cisco Unified Communications Manager or Cisco HCS. It also enables features such as single number reach, call control, and call history. The Call Connector runs as an application within Cisco Expressway or ECP.
* Directory Connect: This connector allows users to synchronize their user directory from their on- premises Active Directory or LDAP server to Cisco Spark. It also enables features such as usersearch, user profile, and user activation. The Directory Connect runs as an application within Cisco Expressway or ECP.
The other options, such as Calendar Aware, Directory Service, and Calendar Service, are not hybrid connectors for Cisco Spark. Calendar Aware is a feature that allows users to see the availability of other users based on their calendar status. Directory Service is a feature that allows users to search and view the contact details of other users. Calendar Service is a feature that allows users to schedule and join meetings from their Cisco Spark app. These features are enabled by the hybrid connectors, but they are not connectors themselves. References := Cisco Spark Hybrid Services Data SheetCisco Spark Hybrid Services - CiscoDeployment guide for Hybrid Calendar - Deploy Expressway-based Hybrid Calendar for Microsoft ExchangeDeployment guide for Hybrid Call Service - Deploy Expressway-based Hybrid Call ServiceDeployment guide for Hybrid Directory Service - Deploy Expressway-based Hybrid Directory Service
NEW QUESTION # 36
How many simultaneous HD calls can be supported on a Cisco Meeting Server 2000?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 37
Which option is a user policy?
- A. Find Me
- B. authentication
- C. call policy
- D. admin policy
Answer: A
Explanation:
A user policy is a set of rules that defines how a user can access and use the video services. A user policy can include the following options1:
* Authentication: This option determines whether a user needs to provide credentials to access the video services, and what type of credentials are required (such as username and password, certificate, or token).
* Admin policy: This option determines whether a user has administrative privileges to manage the video services, such as creating and deleting spaces, adding and removing participants, and configuring settings.
* Call policy: This option determines whether a user can make and receive calls, and what type of calls are allowed (such as audio only, video only, or both).
* Find Me: This option determines whether a user can be reached by other users through a single address, and how the calls are routed to the user's devices (such as desk phone, mobile phone, or video endpoint).
The correct answer is D, Find Me, because it is one of the options that can be configured in a user policy. The other options are not correct because:
* Authentication: This is not a user policy, but a security feature that can be enabled or disabled for the video services.
* Admin policy: This is not a user policy, but a role-based access control feature that can be assigned to different users or groups.
* Call policy: This is not a user policy, but a service policy that can be applied to different domains or zones.
References := 1: Cisco Meeting Server 3.5 Configuration Guides - User Policy Configuration
NEW QUESTION # 38
......
Achive your Success with Latest Cisco 500-710 Exam: https://passguide.dumpexams.com/500-710-vce-torrent.html